ATC-107N là bộ chuyển đổi tín hiệu RS232 sang RS422/RS485, hỗ trợ cách ly quang. ATC-107N cung cấp giải pháp kết nối truyền thông theo mô hình điểm-điểm, điểm-nhiều điểm. Với kết nối điểm-nhiều điểm cho phép kết nối tới 256 điểm RS485/RS422 với tốc độ từ 0-115.2kbps.
Ứng dụng:
- Hệ thống phân phối công nghiệp, tự động hóa điều khiển công nghiệp
- Tự động hóa kiểm soát giao thông đường bộ
- Giám sát mạch kín
- Hệ thống bảo vệ an ninh
- Thẻ thông minh, kiểm tra hệ thống an toàn cổng chấm công
Thông số kỹ thuật:
| Communication Parameters | |||
| Interface | Compatible with EIA/TIA RS-232C, RS- 485/RS-422 standard | ||
| Working Mode | Asynchronous half or full duplex | ||
| Direction Control | Automatic direction control of transmitting data (TXD), zero-latency design | ||
| Baud rate | 300-115.2kbps | ||
| Transmission Distance | 0-5 Km | ||
| Transmission Media | Twisted-pair cable or shielded cable | ||
| Connector | RS-232 | RJ-45 connector, Equipped with DB9 cable. | |
| RS-485/422 | DB9 male or 6-pin Terminal block | ||
| Load Capacity | Point to multi-point, allow to connect 256 RS-422 or RS-485 interface device | ||
| Power Parameters | |||
| Power Supply | RS-232 is serial port power theft. RS-422/485 is power converter | ||
| Isolation | Isolation voltage 3500VRMS 500VDC sequence | ||
| Protecting Grade | RS-232 interface 600W lightning strike and surge protection, RS-422, RS-485 interface 1000W lightning strike and surge protection on each line | ||
| Physical Characteristics | |||
| Signal Indication | 3 signal indication lights indicate TXD RXD and PWR | ||
| Housing | Iron shell | ||
| Weight | 0.5Kg | ||
| Dimensions | 100mmx86mmx26mm | ||
| Environmental Limits | |||
| Operating Temperature | -20 ~ 70°C (-4 ~ 158°F) | ||
| Ambient Relative Humidity | 5% to 95%(non-condensing) | ||
| Standards and Certifications | |||
| RoHS, CE, FCC | |||













